2W-Class
1.0.1 Standard Features
This printer offers the following standard features:
Printing
½ Direct and Thermal Transfer printing methods
½ Batch and Pause Mode Printing
½ 1.5 inch or 3 inch Media Hub (specified at time of order)
½ Easy Media Loading
½ Media Tear Bar
½ Fan-fold media compatible
Memory
½ 256 KB Flash Memory available for user graphic downloads
½ 2 MB FLASH Downloadable Program Memory
½ 16 MB SDRAM Memory
Interfaces
½ IEEE 1284 compliant parallel interface
½ RS-232 serial interface
Operational
½ 2 X 20 Backlit Liquid Crystal Display and functional keypad
½ CG Triumvirate
Scalable font w/AGFA Scalable font engine
½ EFIGS (multi-language display and configuration label support)
½ 203 DPI Printhead (W-6208)
½ 300 DPI Printhead (W-6308 and W-8306)
1.0.2 Optional Features
The printer offers the following optional features:
Cover Dampener
A device to control the closing rate of the cover.
Light-Duty Cutter (
unavailable for the W-8306)
Easily installed on the front of the printer, this rotary mechanism will cut a
maximum material thickness of .006” (.152mm) into minimum lengths of 1.25
inches (31.8 mm).
To Next Page