Datamax W-6208 - Printhead Adjustments; Leveling Cam Adjustment

W-Class 65
5.1 Printhead Adjustments
To ensure consistent print quality over a wide range of media types and
dimensions, the printer is equipped with two adjustments: Leveling Cam and
Pressure.
5.1.1 Leveling Cam Adjustment
The printer features a Leveling Cam to maintain even print whenever using less
than full width media. Use the Cam Setting Numbers for reference (they do not
correspond to specific widths), where position one is the highest setting, while
position nine is the lowest. To adjust the Leveling Cam:
å With media loaded in the printer, download your label format (or use a
Quick Test format) and begin batch printing.
 While observing the printed labels, rotate the Leveling Cam counter-
clockwise to an over-adjusted position (see Example 1).
ê Next, rotate the Leveling Cam clockwise, one click at a time, until the
printed labels contain a complete, even image (see Example 2).
☞
Whenever using labels of a different width, readjust the Leveling Cam.