Datamax W-6208 - 2 Unpacking the Printer

W-Class 5
*HWWLQJ6WDUWHG
2.0 Unpacking the Printer
Inspect the shipping container(s) for damage; if evident, immediately notify the
shipping company to report the nature and extent of the damage.
The printer has been carefully packaged to avoid damage during transit. In order
to operate the printer, you will need to remove the tape and foam placed there
for shipment. Complete the following steps prior to connecting power or
attempting to load media.
å With the arrows on the box pointing ‘Up’, open the box.
 Remove packing foam.
ê Using the straps, carefully lift the printer from the box.
 Remove the straps and the plastic bag from the
printer.
ã Note: It is a good idea to save the carton and packaging materials.