6W-Class
Inspecting the Printer
After removing the printer from the packaging material, check the contents of
the package. In addition to this manual,
the following items should be included:
½ Printer
½ Power cord
½ Accessories CD
½ Any special or additionally
purchased items.
Additional Requirements
The following items are necessary for generating printed labels. Contact your
customer support representative for advice on which media and software is best
suited for your needs.
½ A serial or parallel interface cable; see Section 3.0.1
½ Applicable media; see Section 2.1 for suggestions and Section 7.1 for
requirements.
½ Applicable labeling software
To Next Page
Loading...
