W-Class 49
User Prompts and Condition Messages (continued)
Displayed Message Description Condition(s)
REMOVE LABEL
A label is awaiting
removal.
The Present Sensor option
is enabled and a label
blocks the sensor. Remove
the label to continue
printing.
SYSTEM
INITIALIZING
Normal power-up and
soft reset condition.
Follows the ‘SYSTEM
RESET IN PROGRESS’
message after a reset or
power-up.
SYSTEM RESET
IN PROGRESS
Normal power-up and
soft reset condition.
Occurs when the user resets
the printer via the host or
Front Panel.
UNCALIBRATED
The media calibration
is not set.
Perform calibration; see
Section 5.0.
XXXX OF XXXX
PRINTING
The print job is being
processed.
Batch status indication,
updated with each label
printed.
To Next Page
Loading...
