EasyManuals Logo

Davis Instruments Vantage VUE Console Manual

Davis Instruments Vantage VUE
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Console Maintenance
41
Console Maintenance
Changing Batteries
If the message, LOW CONSOLE BATTERIES appears in the Weather Center, replace
the batteries.
1. In order to avoid losing any stored weather data, plug in the AC adapter before
removing the batteries.
Note: If you cannot plug in the AC adapter, enter Setup Mode by pressing and releasing 2ND and
pressing SETUP. Entering Setup Mode makes sure the station isn’t writing any data to
memory when power is removed.
2. Remove the battery cover located on the back of the console by pressing down on
the two latches at the top of the cover.
3. In the top battery compartment, insert a fingertip between the battery and the
notched end of the compartment and remove the battery.
4. Repeat the process for the batteries in the bottom battery compartment.
5. Install the new batteries. (See “Installing Batteries” on page 3.)
6. Replace the battery cover and remove the AC power adapter, if desired.
Console Firmware Versions
From time to time Davis engineers update the Vantage Vue
console firmware. View the firmware version in Value 4 in
the Statistical Diagnostic screen, or by pressing and holding
DONE and + from the Current Weather Mode screen.
You can check the firmware version currently available and download, at no charge,
the newest firmware to your console on the Weather Software Support section of our
website (http://www.davisnet.com/support). A WeatherLink data logger is required
to update the firmware into the console.
One Year Limited Warranty
For details on our warranty policy, please refer to the Maintenance, Service, and Repair
Information brochure included with your station.
Contacting Davis Technical Support
If you have any questions, or encounter problems installing or operating your
Vantage Vue weather station, please contact Davis Technical Support. We’ll be glad to
help.
(510) 732-7814 — Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time. We are unable to
accept collect calls.
(510) 670-0589 — Technical Support Fax.
support@davisnet.com — E-mail to Technical Support.
info@davisnet.com — General e-mail.
www.davisnet.com — Davis Instruments website.
See the Weather Support section for copies of user manuals, product specifications,
application notes, and information on software updates. Watch for FAQs and other
updates.

Table of Contents

Other manuals for Davis Instruments Vantage VUE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Davis Instruments Vantage VUE and is the answer not in the manual?

Davis Instruments Vantage VUE Specifications

General IconGeneral
Console Display TypeLCD
Wind Direction Range0 to 360°
Wind Direction Accuracy±3°
Temperature Accuracy±1°F (±0.5°C)
Humidity Accuracy±3%
Solar Radiation Range0 to 1800 W/m²
Solar Radiation Accuracy±5%
UV Index Range0 to 16
Wireless Transmission Range1000 feet (300 meters)
Update Interval2.5 seconds
Temperature Range-40°F to +150°F (-40°C to +65°C)
Humidity Range0 to 100% RH
Rain Collector Resolution0.01 inches (0.2 mm)
Wind Direction Resolution
Power Source (Integrated Sensor Suite)Solar panel with battery backup
Power Source (Console)AC adapter or 3 C batteries
Wind Speed Accuracy±2 mph (±3 kph) or ±5%, whichever is greater
Rainfall Accuracy±4%
Operating Temperature-40°F to +140°F (-40°C to +60°C)
Wind Speed Range0 to 150 mph (0 to 241 km/h, 0 to 67 m/s)

Related product manuals