3. For all other dispenses place the jug in the middle below the
main outlet.
4. If the jug submenu is not visible tap the [Jug] button from
the main menu (see Main menu - Cup dispensing on page 21).
5. Tap the desired beverage and jug filling from the shown
selection buttons.
▪ or tap the [Cup mode] button to return to the Main menu
6. Tap the [Start] button to start the dispense.
▪ tap the [Cancel] button to return to the Main menu (see
Main menu - Cup dispensing on page 21).
▪
when payment mode is activated, full payment is needed
first to enable the [Start] button. Check the payment (on
page 44) section for more details.
▪
if the [Start] button is disabled check the Message area
for more details.
7.
The Dispense submenu (see Dispense submenu on page 31) is
now displayed.
▪
tap the [Stop] button to interrupt and stop the dispense.
8. When the dispense is finished the Ready submenu (on page
33) is shown.
▪ do not remove your cup/jug until the message "Ready,
take your cup (see Message: Ready, take your cup on page
103)" is shown.
▪ the message will remain visible on the screen until the
cup/jug is removed.
▪ to add an additional beverage to the same cup/jug tap the
[Cancel] button.
CAUTION - Hot liquid can leak from the outlet
nozzle after the dispense is finished.
9.
The filled jug is ready.
10. Place the cup stand back in the suspension points in the door.
43
Edge XNA Small Cabinet 18-000 CoEx XL® brewer User Manual 5DUXNQ20M EN V2.1
To Next Page
Loading...
