Purpose
Required
Interval
Procedure
5.6.18 Deep clean the cold water outlet nozzle — optional
The cold water outlet nozzle must be cleaned and disinfected
regularly to prevent bacteria growth.
Use the following parts to perform the procedure:
• Multi purpose, disposable cloth.
•
Cleaning agent.
•
Protective clothing, gloves and safety glasses.
•
Disinfectant solution.
•
Disposable paper towels.
•
Rinsing tub or 1 liter jug.
•
Brush.
NOTE
Do not use aggressive cleaning products or abrasives
to clean (parts of) the machine.
Perform this procedure:
• Monthly (see Monthly maintenance on page 49), more if
needed (depending on machine usage and environmental
conditions).
Perform the following steps:
WARNING
Wear protective clothing, gloves and safety glasses when working
with cleaning chemicals.
1.
Submerge a clean cloth in warm water. Pre clean the cold
water outlet nozzle using the cloth.
2. Submerge a clean cloth into the cleaning agent
(concentration recommended by cleaning agent
manufacturer’s instructions). Remove the cloth and remove
excess water.
3. Clean the cold water outlet nozzle wiping the cloth over the
entire area re-submerging the cloth as necessary.
4. Using a brush, brush around the cold water nozzle to dislodge
any dried on soil. Remove the soil with a cloth.
5.
Soak a clean disposable cloth in clean warm water and rinse
the outlet nozzle until all soil and cleaning agent residues are
removed.
6. Soak a clean disposable cloth in disinfectant solution, ensure
that the whole area is wiped.
7. Leave for 10 minutes.
Edge XNA Small Cabinet 18-000 CoEx XL® brewer User Manual 5DUXNQ20M EN V2.1
82
To Next Page
Loading...
