Purpose
Required
Interval
Total time
Procedure
5.6.7 Flush mixers and brewer
The Rinse process flushes hot water through the mixers and the
brewer to remove any residue.
Use the following parts to perform the procedure:
• Rinsing tub.
Perform this procedure:
•
At least Daily (see Daily maintenance on page 47), more if
needed.
•
Total time needed to rinse is 1 to 2 minutes.
Perform the following steps:
1.
If needed Open the door (on page 50) to show the service
menu on the touch screen.
2. Close the door (on page 50).
3. Place a rinsing tub underneath the outlet nozzle to collect the
hot waste water.
4.
Tap the [Rinse] button from the Service menu.
▪
Hot water from the boiler flows through the mixers and
brewer.
5. Repeat the previous step until clean water comes out of the
machine.
Edge XNA Small Cabinet 18-000 CoEx XL® brewer User Manual 5DUXNQ20M EN V2.1
54
To Next Page
Loading...
