To Next Page

To Previous Page

RECORD SETUP

This option allows you to turn recording for each camera ON or OFF, set video quality, adjust the frame rate, set the

resolution, enable or disable audio recording, pick a recording mode (scheduled or continuous), set the le pack time

(recorded video size in minutes) and copy settings from one camera to another.

reC para taB

Recording parameters allows you to choose the channel you wish to record, turn record ON or OFF, set the Pack

Duration as well as enable PreRecord if you wish to enable Motion Record.

Record (Enable/Disable)

To enable/disable RECORD on channels:

1. Select the drop down menu beside the channel(s) you

would like adjusted.

2. Highlight whether you would like the camera

ENABLED or DISABLED and press SELECT.

3. Select APPLY to save settings.

To COPY settings:

1. Select the channel at the bottom of the page that you wish to copy.

2. Select which channels you would like to apply the settings to.

3. Select COPY , then select APPLY to save settings.

Pack Duration

The DVR allows you to choose the maximum length that each recorded video clip will be. This is for backup purposes.

To adjust and/or set a PACK TIME:

1. Select the drop down menu beside PACK TIME.

2. Highlight the time you would like each recorded video clip to be (15, 30, 45 and/or 60 min) and press SELECT.

3. Select APPLY to save settings.

PreRecord

This function works with motion detection. If enabled the DVR will pull footage prior to motion being detected

for that camera.

1. Select the drop down menu beside PRERECORD.

2. Select ENABLE or DISABLE.

3. Select APPLY to save settings.

MAIN MENU

Defender DVR User Manual

Questions and Answers: