Defender DVR User Manual

41
Version taB
The VERSION tab allows you to view information about your DVR:
ADVANCED SETUP
maintain taB
The MAINTAIN tab allows you to load system default settings, set up your DVR for automatic maintenance, adjust
system reboot, manually reboot the system, as well as update the system with a USB device.
Turning AUTO MAINTENANCE on or o:
AUTO MAINTENANCE activates the AUTO REBOOT function. You
must set a schedule for AUTO REBOOT if selecting ENABLE.
1. Select the drop down box next to AUTO MAINTAIN and
select ENABLE.
2. Select APPLY to save your changes.
Auto Reboot
AUTO MAINTAIN must be enabled before setting the AUTO
REBOOT schedule.
Setting AUTO REBOOT:
1. Select the drop down box next to AUTO REBOOT, and select
how often you would like the system to reboot, daily, weekly
or monthly.
2. Click the next drop down box to select the day of the week/month you would like the system to reboot.
3. Insert a specic time to reboot in the last box on the right. (Based on a 24 hr clock).
4. Select APPLY to save your changes.
To REBOOT the DVR:
1. Click the REBOOT button.
2. A screen will appear asking for conrmation to reboot. Select OK to continue or CANCEL to quit.
3. Once prompted to reboot the DVR, the DVR will shut down and restart.
Update
A system update can be done if there is new software available for your DVR model. This should only be done if a
DEFENDER® representative recommends it.
To UPDATE system:
1. Download the upgradeles from www.defender-usa.com and put the les onto your USB ash drive.
2. Insert the USB ash drive into the back of the DVR.
3. Click UPDATE and click OK to conrm. This may take up to 10 minutes.
4. Once the update is complete, your DVR will restart with the new software update.
Maintain Tab Screen
MAIN MENU
• DeviceName
• DeviceID
• DeviceType
• MACAddress
• SoftwareVersion
• IEVersion
• HardwareVersion

Defender DVR Specifications

General

Brand	Defender
Model	DVR
Category	DVR
Language	English