Defender PHOENIXM2 User Manual

21
INSTRUCTION
3 . Select Brightness 4 . Using the LEFT or RIGHT navigation arrows,
highlight the camera you would like to adjust
and change the Brightness
5 . When the desired camera is highlighted in Blue
press the RIGHT or LEFT navigation arrows until
you reach the desired brightness level (1 low - 6
High)
6 . Press OK to save the settings and you will return
to the Camera Settings page

Defender PHOENIXM2 Specifications

General

Power Source	AC Adapter
Number of Zones	4
Screen Size	7 inches
Operating Temperature	-10°C to 50°C
Battery Backup	Up to 8 hours
Detection Range	Up to 40ft