● Designer's handbook
● Description of functions and sequences
● Parameters
● Utility software
● Installation and commissioning instructions
● Tools required
● Mounting the controller
● Terminals and wiring diagram
● Parameters
● Sequence for commissioning
● Commissioning using the utility software
● Commissioning using the front panel
● Technical support
● Operator's manual
● Basic operator tasks
● Front panel
● Parameters
● Utility software
● Technical support
Glossaries are included in the Designer's handbook, the Installation and commissioning instructions
and the Operator's manual.
1.1.6 Getting technical support
You can read about service and support options on the DEIF website, www.deif.com. You can also find con-
tact details on the DEIF website.
You have the following options if you need technical support for your controller:
● Technical documentation: All the product technical documentation is available on the DEIF website.
● Training: You can ask for training.
● Support: You can call or email DEIF. DEIF offers 24-hour support. There may also be a local DEIF sub-
sidiary.
● Service: DEIF engineers can help with design, commissioning, operating and optimisation.
1.2 Warnings, safety and legal information
1.2.1 Warnings and notes
A number of warnings and notes are included in this document. These are highlighted, to separate them from
the general text.
Warnings indicate potentially dangerous situations. If the guidelines are not followed, these sit-
uations could result in death, personal injury or damaged equipment.
Notes provide general, helpful information.
1.2.2 Safety issues
Installing and operating the unit may require work with dangerous currents and voltages. The installation must
only be carried out by authorised personnel who understand the risks involved in working with live electrical
equipment.
CGC 200 Operator's manual 4189340770
UK
Introduction
DEIF A/S Page 5 of 43
To Next Page
Loading...
Need help?
General
