2.3 LEDs
2.3.1 LED functions
The display unit has three LEDs. The lighting and status of the LEDs vary according to the situation.
The display LEDs indicate the following:
LED Description Status Situation
Power OK OFF The unit is not powered up.
RED STEADY The power supply is within the limits.
Alarm LED OFF No alarm present.
RED FLASHING Active, non-acknowledged alarm(s) present.
Mode OFF The unit is in manual mode.
RED STEADY The unit is in auto mode.
2.4 Display
2.4.1 Display functions
The display (dimensions 20 mm x 40 mm) shows readings and alarms. Examples, with icons, in English, are
given below.
2.4.2 Display views
You can see the genset's measured values in the views on the CGC 200 LCD display. Press
to scroll
through the views.
Example: Genset AC voltage and frequency (Hz)
CGC 200 Operator's manual 4189340770
UK
Front panel, push-buttons, LEDs and
display
DEIF A/S Page 8 of 43
To Next Page
Loading...
