Deif CGC 200 User Manual

2. Front panel, push-buttons, LEDs and display
2.1 Front panel
2.1.1 Front panel drawing
The drawing below shows the CGC 200 front panel.
2.2 Push-buttons
2.2.1 Push-button functions
The push-buttons on the front panel have the following functions:
Button Description Function
Stop ● Stops the engine and changes the mode to Stop if the genset is running.
● Resets the alarms if there is a shutdown alarm.
● Tests all the LEDs and the full LCD display if pressed for more than three
seconds in Stop mode.
● Changes the mode to Manual, if in Auto mode.
Start ● Starts the engine (Manual mode only).
● Changes the mode to Manual, if in Auto mode.
Auto mode Changes from Manual to Auto mode.
Page down Pages down, to show other operating values.
The push-buttons on the front panel can also be used to change the controller parameters. This is described
later in this manual.
CGC 200 Operator's manual 4189340770
UK
Front panel, push-buttons, LEDs and
display
DEIF A/S Page 7 of 43

Deif CGC 200 Specifications

General

Brand	Deif
Model	CGC 200
Category	Controller
Language	English