Dell EMC H745P MX - Assigning Dedicated Hot Spare; Convert to RAID Capable; Convert to Non-RAID Disk

7 Click Yes.
The global hot spare disk is created successfully.
Assigning dedicated hot spare
To assign a dedicated hot spare from the HII Conguration Utility, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Physical Disk Management.
The list of physical disks is displayed.
3 Select the physical disk.
4 From the Operations drop-down menu, select Assign Dedicated Hot Spare.
5 Click Go.
A screen is displayed asking if you are sure you want to perform the operation.
6 Select the Conrm option.
7 Click Yes.
The dedicated hot spare disk is created successfully.
Convert to RAID capable
To assign a dedicated hot spare from the HII Conguration Utility, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Physical Disk Management.
The list of physical disks appears.
3 Select the physical disk.
4 From the Operations drop-down menu, select Convert to RAID capable.
5 Click Go.
A screen appears asking if you are sure you want to perform the operation.
6 Select the Conrm option.
7 Click Yes.
The dedicated hot spare disk is created successfully.
Convert to Non-RAID disk
To assign a dedicated hot spare from the HII Conguration Utility, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Physical Disk Management.
The list of physical disks appears.
3 Select the physical disk.
4 From the Operations drop-down menu, select Convert to Non-Raid disk.
5 Click Go.
A screen appears asking if you are sure you want to perform the operation.
6 Select the Conrm option.
7 Click Yes.
HII
conguration utility 59