Dell EMC XC Core XC6515 - Removing the USB Memory Key; Installing the USB Memory Key

To locate the internal USB port on the system board, see the Jumpers and connectors section.
2. If installed, remove the USB memory key from the USB port.
Figure 81. Removing the USB memory key
3. Insert the replacement USB memory key into the USB port.
Figure 82. Installing the USB memory key
Next steps
1. Install the air shroud.
2. Follow the procedure listed in After you work inside your system.
3. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
108
Installing and removing system components