Dell EMC XC Core XC6515 - Dell EMC XC Core XC6515 System Overview; Front View of the System

Dell EMC XC Core XC6515 system overview
The Dell EMC XC Core XC6515 system is a 1U server that supports:
• One AMD EPYC 7002 series processor
• Sixteen DIMM slots
• Two redundant AC power supply units
• Up to 4 x 3.5 inch, 8 x 2.5 inch SAS/SATA drives, 10 x 2.5-inch drives (with 8 SAS/SATA/ NVMe drives + 2 NVMe drives) or 10x 2.5-
inch NVMe drives only.
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe PCIe
SSD User's Guide at https://www.dell.com/support> Browse all Products > Data Center Infrastructure > Storage
Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and Documents.
NOTE: All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
For more information about supported drives, see the Drive specifications section.
Topics:
• Front view of the system
• Rear view of the system
• Inside the system
• Locating your system service information
• System information label
• Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
1.
Left control panel 2. Optical drive (optional)
3. VGA port 4. Right control panel
5. Information tag 6. Drive (4)
Table 1. Features available on the front of the system
Item Ports, panels, and slots Icon Description
1 Left control panel N/A
Contains the system health, system ID, status LED, and the iDRAC
Quick Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
• Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
3
Dell EMC XC Core XC6515 system overview 15