Dell EMC XC Core XC6515 - Remove a Drive from a Drive Carrier; Installing a Drive Carrier; Removing the Drive from the Drive Carrier

Figure 31. Installing a drive carrier
Next steps
If removed, Install the front bezel.
Remove a drive from a drive carrier
Prerequisites
• Follow the safety guidelines listed in the Safety instructions.
• If installed, Remove the front bezel.
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2. Lift the drive out of the drive carrier.
Figure 32. Removing the drive from the drive carrier
Installing and removing system components
67