Dell EMC XC Core XC6515 - System Diagnostics and Indicator Codes; Status LED Indicators

System diagnostics and indicator codes
The following sections contain information about the chassis LEDs and indicator codes for the XC Core XC6515 system.
Topics:
• System diagnostics and indicator codes
• Status LED indicators
• System health and system ID indicator codes
• iDRAC Direct LED indicator codes
• LCD panel
• NIC indicator codes
• Power supply unit indicator codes
• Drive indicator codes
• Using system diagnostics
• System board diagnostic LED indicators
• Enhanced Preboot System Assessment
System diagnostics and indicator codes
The diagnostic indicators on the system front panel display system status during system startup.
The following sections contain information about the chassis LEDs and indicator codes for the Dell EMC XC Core XC6515 system.
Status LED indicators
NOTE: The indicators display solid amber if any error occurs.
Figure 104. Status LED indicators
Table 86. Status LED indicators and descriptions
Icon Description Condition Corrective action
Drive indicator The indicator turns solid amber if
there is a drive error.
• Check the System Event Log to determine if the
drive has an error.
• Run the appropriate Online Diagnostics test. Restart
the system and run embedded diagnostics (ePSA).
• If the drives are configured in a RAID array, restart
the system, and enter the host adapter configuration
utility program.
Temperature
indicator
The indicator turns solid amber if the
system experiences a thermal error
Ensure that none of the following conditions exist:
9
System diagnostics and indicator codes 143