Dell EMC XC Core XC6515 - Miscellaneous Settings Details

To Next Page

To Previous Page

Operations with the setup password enabled

If Setup Password is set to Enabled, enter the correct setup password before modifying the system setup options.

If you do not type the correct password in three attempts, the system displays the following message:

Invalid Password! Number of unsuccessful password attempts: <x> System Halted! Must power

down.

Password Invalid. Number of unsuccessful password attempts: <x> Maximum number of password

attempts exceeded.System halted.

Even after you turn off and restart the system, the error message is displayed until the correct password is typed. The following options

are exceptions:

• If System Password is not set to Enabled and is not locked through the Password Status option, you can assign a system

password. For more information, see the System Security Settings screen section.

• You cannot disable or change an existing system password.

NOTE: You can use the password status option with the setup password option to protect the system password from

unauthorized changes.

Miscellaneous settings

To view the Miscellaneous Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >

Miscellaneous Settings.

Table 40. Miscellaneous Settings details

Option Description

System Time Enables you to set the time on the system.

System Date Enables you to set the date on the system.

Asset Tag Specifies the asset tag and enables you to modify it for security and tracking

purposes.

Keyboard NumLock Enables you to set whether the system boots with the NumLock enabled or disabled.

This option is set to On by default.

NOTE: This option does not apply to 84-key keyboards.

F1/F2 Prompt on Error Enables or disables the F1/F2 prompt on error. This option is set to Enabled by

default. The F1/F2 prompt also includes keyboard errors.

Load Legacy Video Option ROM Enables or disables the Load Legacy Video Option ROM option. This option is set to

Disabled by default.

Dell Wyse P25/P45 BIOS Access Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to

Enabled by default.

Power Cycle Request Enables or disables the Power Cycle Request. This option is set to None by default.

Table 41. Miscellaneous Settings details