Dell 6100 - Base Memory and Extended Memory; Mouse; Video Mode; Advanced Menu Categories

4-6 Dell PowerEdge 6100/200 System User’s Guide
When Default is selected (the default), Rate Delay is set
to 250 milliseconds (ms) and Rate is set to 15 characters
per second (cps). If you select the Override option, you
can adjust the Rate Delay and Rate categories to values
of your choice.
Video Mode
This category displays the type of video used by the
system.
Mouse
This category displays whether a mouse is Installed (the
default) or Not Installed.
Base Memory and Extended Memory
These categories display the amount of system memory
available as base memory and extended memory.
Advanced Menu Categories
This section explains each of the system setup categories
in the Advanced menu (see Figure 4-3). The Advanced
menu displays information about the type and speed of
the system microprocessor(s). The Peripheral Configura-
tion, Advanced Chipset Configuration, and Plug and Play
Configuration submenus are accessed through the
Advanced menu.
Figure 4-3. Advanced Menu
Slot 1: Processor 1 Type Pentium Pro Fam.
Processor 1 Speed 200 MHz
Processor 2 Type Pentium Pro Fam.
Processor 2 Speed 200 MHz
Slot 2: Processor 1 Type Absent
Processor 1 Speed Absent
Processor 2 Type Absent
Processor 2 Speed Absent
Cache Size 512 KB
Chip Set Stepping B0
Peripheral Configuration Press Enter
Advanced Chipset Configuration Press Enter
Plug and Play Configuration Press Enter
Main Advanced Security Exit
F1 Help
ESC Back
Enter Select
Previous Item
Next Item
Select Menu
F5 Setup Defaults
F6 Previous Value
F10 Save & Exit