Dell 6100 - Cache Size; Chip Set Stepping; Figure 4-4. Peripheral Configuration Submenu; Peripheral Configuration Submenu

Using the System Setup Program 4-7
Processor
The four processor categories for each processor slot
identify the type and speed of the microprocessors
installed in the system. These categories have no user-
selectable options.
Cache Size
This category displays the amount of integrated level-2
cache memory in the microprocessor module. This cate-
gory has no user-selectable options.
Chip Set Stepping
This category displays the system chipset’s stepping
value.
Peripheral Configuration Submenu
To access the Peripheral Configuration submenu (see
Figure 4-4), highlight the Peripheral Configuration
option in the Advanced menu and press <Enter>.
Figure 4-4. Peripheral Configuration Submenu
Configuration Mode Auto
Standard IDE Interface Disabled
Floppy Interface Enabled
Serial Port 1 Address COM1, 3F8h
Serial Port 2 Address COM2, 2F8h
Parallel Port Address LPT1, 378h
Parallel Port Mode ISA Compatible
Parallel Port ECP-DMA Disabled
Serial Port 1 IRQ IRQ4
Serial Port 2 IRQ IRQ3
Parallel Port IRQ IRQ7
Onboard SCSI-A ROM Scan Enable
Onboard SCSI-B ROM Scan Enable
Console Redirection Disable
F1 Help
ESC Back
Enter Select
Previous Item
Next Item
Select Menu
F5 Setup Defaults
F6 Previous Value
F10 Save & Exit
Peripheral Configuration