Dell 6100 - System Setup Screens; Table 4-1. System Setup Keys

4-2 Dell PowerEdge 6100/200 System User’s Guide
After you set up your system, run the system setup
program to familiarize yourself with your system configu-
ration information and optional settings. Dell recommends
that you print the system setup screens or write down the
information for future reference.
Before you use the system setup program, you need to
know the kind of diskette drive installed in your com-
puter. (The standard diskette drive is a 1.44-megabyte
[MB], 3.5-inch drive).
System Setup Screens
•
Menu Bar
The menu bar at the top of each screen lists the four
main menus.
•
Configuration Options and System Data
The large box on the left side of each screen lists cat-
egories that define the installed hardware in your
system.
Fields beside the categories contain options or
values.
•
Key Functions
The box on the right side of each screen lists the keys
and their specific functions, which are also listed in
Table 4-1.
Table 4-1. System Setup Keys
Keys Action
Displays help for specific cate-
gories.
Displays the Exit menu unless
you are in a submenu. If you
are in a submenu, pressing the
<Esc> key displays the parent
menu.
Selects the highlighted cate-
gory
Moves the cursor up or down.
Moves the cursor to the next
menu in each direction.
Loads the default system setup
values for all menus.
Discards changes made since
setup program was entered.
Saves changes and exits the
setup program.
or
or