Dell 6100 - Main Menu; Step 1: about System Configuration; Step 2: Add and Remove Boards; Figure 5-1. Main Menu

5-4 Dell PowerEdge 6100/200 System User’s Guide
Figure 5-1. Main Menu
M ain Menu
The following sections describe each of the menu options
in the main menu and the submenus for those options.
Step 1: About System Configuration
The Step 1: About System Configuration option presents
an overview of the configuration process.
Step 2: Add and Remove Boards
Use the Step 2: Add and Remove Boards option the first
time you configure your system and every time you
change your system configuration.
NOTES: If you enabled the administrative password
through the system setup program or through the system
configuration utility, the system configuration utility
prompts you for the administrative password when you
select Step 2: Add and Remove Boards. If you enter the
administrative password correctly, the utility displays the
Add and Remove Boards menu (see Figure 5-2) and allows
you to make changes.
If you enter a user password instead of an administrative
password, you will get the following message:
Password Invalid. Try Again?
If you enter the administrative password incorrectly three
times, the system configuration utility displays the follow-
ing message:
Access to the baseboard configuration files
has been denied.
The following subsections describe each of the options
shown in the Add and Remove Boards menu.
System Configuration Utility
configuration options
title box
key functions
Step 1: About System Configuration
Step 2: Add and Remove Boards
Step 3: Change Configuration Settings
Step 4: Save Configuration
Step 5: View Switch/Jumper Settings
Step 6: Exit
[Select=ENTER] [Exit=ESC] [Help=F1] [Utilities=F9]