Displays the processor type.
Displays the processor identification code.
Displays the processor speed.
Displays the processor L2 cache size.
Displays the processor L3 cache size.
Advanced — Standard CMOS Features
Displays the current time.
Displays the SATA 1 drive integrated in the computer.
Displays the SATA 2 drive integrated in the computer.
Displays the SATA 3 drive integrated in the computer.
Displays the SATA 4 drive integrated in the computer.
Displays the SATA 5 drive integrated in the computer.
Displays the SATA 6 drive integrated in the computer.
Displays the SATA 7 drive integrated in the computer.
Displays the SATA 8 drive integrated in the computer.
If enabled, the system will HALT during boot to display system errors.
Advanced — Advanced BIOS
Features
Select power-on state for num-lock.
Allows you to enable or disable the RAID Option ROM screen during POST.
Advanced — CPU Configuration
Hyper-threading Technology
If disabled only one thread per enabled core is active.
Enable XD Bit Capability to allow the processor to distinguish between the bits of code that can be executed and the
ones that cannot be executed.
If enabled, the processor clock speed and core voltage are adjusted dynamically based on the processor load.
If enabled, C-State: Processor idle is set to C2/C3/C4.
Advanced — Integrated Devices
Allows you to enable or disable the integrated USB controller.
Allows you to enable or disable the integrated audio controller.
Onboard IEEE1394 Controller
Allows you to enable or disable the onboard IEEE 1394 controller.
Allows you to enable or disable the onboard LAN controller.
Allows you to enable or disable the network controller's boot option.
Jmicron 362 ATA Controller
Allows you to enable or disable the ATA controller.
Allows you to configure the integrated hard drive controller to AHCI or RAID.
Advanced — Power Management Setup
Sets the energy-saving mode of the ACPI function.
Sets what action the computer takes when power is restored.
Allows the computer to start up at a certain time.
Advanced — Frequency/Voltage Control
Displays the current processor speed.
Displays the current memory speed.
Allows you to change the processor ratio.
Allows you to change the memory ratio.
Extreme Memory Profile (X.M.P)
Allows you to change the extreme memory profile value.
Allows you to change the memory timing mode.