Dell Alienware Aurora R3 Service Manual

Advance DRAM Configuration
Allows you to change the Advance DRAM Configuration.
Overclock Configuration
Allows you to access the Overclock Configuration submenu.
Overvoltage Configuration
Allows you to access the Overvoltage Configuration submenu.
Load Level 1 Defaults
Allows you to load Level 1 default setting.

NOTE: This setting may not be available for some processors.
Load Level 2 Defaults
Allows you to load Level 2 default setting.

NOTE: This setting may not be available for some processors.

Advanced — ME Subsystem
ME Version
Displays the ME version number.
ME subsystem
Allows you to enable or disable the ME subsystem.
End of Post Message
End of Post Message.
Execute MEBx
Allows you to enable or disable the Execute MEBx.
Integrated Clock Chip
Configuration
Allows you to access the Integrated Clock Chip Configuration submenu.

Advanced — ME Subsystem — Integrated Clock Chip Configuration Submenu
ICC OverClocking Lib Version
Displays the ICC OverClocking Lib Version number.
Number of ICC Profiles:
Displays the number of ICC Profiles supported on your computer.
Current ICC Profile Index:
Displays the current ICC Profile Index value.
ICC Enable
Allows you to enable or disable the Integrated Clock Chip.

Advance DRAM Configuration Submenu
Memory-Z
Opens submenu to display the SPD configuration for each memory module.
Command Rate
Displays the Command Rate (editable in Manual Mode).
tCL
Displays the Column Address Strobe Latency (editable in Manual Mode).
tRCD
Displays timing of RAS to CAS delay (editable in Manual Mode).
tRP
Displays timing of RAS Precharge (editable in Manual Mode).
tRAS
Displays timing of Row Address Strobe (editable in Manual Mode).
tRFC
Displays timing of Refresh to Archive/Refresh cycle time (editable in Manual Mode).
tWR
Displays timing of Write Recover (editable in Manual Mode).
tWTR
Displays Write to Read Delay (editable in Manual Mode).
tRRD
Displays RAS to RAS delay (editable in Manual Mode).
tRTP
Displays Read to Precharge Command Delay (editable in Manual Mode).
tFAW
Displays the Four Activate Window (editable in Manual Mode).
tWCL
Displays the Write CAS Latency (editable in Manual Mode).
tCKE
Displays the Minimum CKE High and Low Pulse Width (editable in Manual Mode).

Overclock Configuration Submenu
Turbo Mode
If enabled, allows processor to run at faster frequencies than marked.
Long duration power limit
Allows you to change the long duration power limit.
Long duration maintained
Allows you to change the long duration time limit.
Short duration power limit
Allows you to change the short duration power limit.
1-Core Ratio Limit
Allows you to change the ratio limit of the processor's first core.
2-Core Ratio Limit
Allows you to change the ratio limit of the processor's second core.
3-Core Ratio Limit
Allows you to change the ratio limit of the processor's third core.
4-Core Ratio Limit
Allows you to change the ratio limit of the processor's fourth core.
VID Override for Max Turbo
Ratio
Allows you to change the VID override for max turbo ration value.

Overvoltage Configuration Submenu
DDR3 Memory Voltage
Adjusts the DDR3 Memory Voltage.
Dynamic CPU VCore Offset
Allows you to change the Processor Core Voltage Offset value.

Dell Alienware Aurora R3 Specifications

General

Brand	Dell
Model	Alienware Aurora R3
Category	Desktop
Language	English