Steps
1. Connect the battery cable to the battery.
2. Adhere the battery cable to the battery.
3. Turn the battery over.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Rear-I/O cover
Removing the rear-I/O cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image(s) indicate the location of the rear-I/O cover and provides a visual representation of the removal
procedure.
28
Removing and installing components
To Next Page
Loading...
Need help?
General