Dell Chromebook 5190 - Installing the Battery; Speaker; Removing Speaker

Installing the battery
1 Insert the battery into the slot on the system.
2 Replace the 3 (M2x3) screws that secure the battery to the system.
3 Route the battery cable and connect the cable to the connector on the system board.
4 Ax the 2 adhesive tap to secure the cable to the system board.
5 Place the 2 metal brackets to secure the battery cable to its connector on the system board and the battery.
6 Replace the 2 (M2x3) screws, one on each metal bracket, to secure each bracket to the system.
7 Install the:
a base cover
b microSD card
8 Follow the procedure in After working inside your computer.
Speaker
Removing speaker
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
3 To remove the speaker:
a Disconnect the speaker cable from the connector on the system board [1].
b Peel the adhesive tape that secures the speaker cable to the system [2, 4].
c Unroute the speaker cable from the routing channel [3].
Removing and installing components
15