2 Press <Clrl> + <Alt> + <T> The interface appears as shown in the screenshot below:
3 Type in the CROSH command for diagnostics. Type 'help' for a list of available commands. Type help_advanced to display a complete
list of commands for debugging purposes
Alternately, refer to CROSH Commands for the list of the CROSH commands available for diagnostics.
CROSH commands
The table below lists the available commands in Chrome Shell (CROSH).
Table 14. Help commands
Command Purpose
exit Exits the CROSH Shell.
help Displays this help.
help_advanced Displays the help for more advanced commands, used for
debugging.
ping [-c count] [-i interval] [-n] [-s packetsize] [-W waittime] — Sends
ICMP ECHO_REQUEST packets to a network host. If is "gw", then
the next hop gateway for the default route is used. It works just like
the ping command on other operating systems. Press <Clrt> + <C>
to stop the ping process or halt any other command in CROSH.
ssh [optional args...] — Starts the ssh subsystem if invoked without any
ar
guments. "
ssh <user> <host>"
, "ssh <user> <host> <port>"
, "
ssh<
user>@<host>"
. or "ssh <user>@<host> <port>" connect without
entering the subsystem
ssh_forget_host Removes a host from the list of known ssh hosts. This command
displays a menu of known hosts and prompts for the host to forget.
top Sets the chaps debug logging level. No arguments start verbose
logging
Diagnostic and troubleshooting 61
To Next Page
Loading...
