Installing speaker
1 Place the speakers into the slots on the system.
2 Route the speaker cable through the retention clips in the routing channel.
3 Ax the adhesive tape to secure the speaker cable to the system.
4 Connect the speaker cable to the connector on the system board.
5 Install the:
a battery
b base cover
c microSD card
6 Follow the procedure in After working inside your computer.
WLAN card
Removing WLAN card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
3 To remove the WLAN card:
a Remove the single (M2x3) screw that secures the WLAN card bracket to the system [1].
b Remove the WLAN card bracket that secures the WLAN antenna cables [2].
c Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
d Slide and lift the WLAN card away from the system [4].
Removing and installing components
17
To Next Page
Loading...
