Installing Input output board
1 Place the Input output (I/O) board to its slot in the system.
2 Replace the 2 (M2x3) screws to secure the I/O board to the system board.
3 Connect the two I/O cables and close the latch to secure it to the I/O board.
4 Place the I/O bracket and replace the 2 (M2x4) screws to secure the bracket to the system.
5 Install the:
a battery
b base cover
c microSD card
6 Follow the procedure in After working inside your computer.
20
Removing and installing components
To Next Page
Loading...
