Input Output board
Removing Input Output board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
3 To remove the Input Output board (I/O board):
a Lift the latch and, disconnect the two I/O cables from the connector on the I/O board [1].
b Remove the 2 (M2x4) screws that secure the I/O bracket to the system [2].
c Open the I/O bracket up to 90° backward and release the bracket from the slot on the system [3].
d Lift the bracket away from the system.
e Remove the 2 (M2x3) screws that secure the I/O board to the system [1].
f Lift the I/O board away from the system [2].
Removing and installing components
19
To Next Page
Loading...
