Dell Chromebook 5190 - Installing the Touchpad; Keyboard; Removing Keyboard

Installing the touchpad
1 Place the touchpad into its slot on the system.
2 Replace the 3 screws to secure the touchpad frame to the system.
3 Connect the touchpad cable to the connector in the touchpad frame.
4 Ax the adhesive tape to secure the touchpad frame to the system.
5 Place the touchpad bracket into the slot.
6 Replace the 3 screws to secure the touchpad bracket to the system.
7 Install the:
a battery
b base cover
c microSD card
8 Follow the procedure in After working inside your computer.
Keyboard
Removing keyboard
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
3 To remove the keyboard:
a Release the latch and, disconnect the keyboard cable from the connector on the system board [1].
b Use a plastic scribe to release the keyboard from the two release holes in the system [2].
NOTE
: The two release holes for the keyboard is indicated by the "KB" labeling.
Removing and installing components 23