4 To remove the system board:
a Remove the screws that secure the system board to the computer [1].
b Slide the system board and lift it away from the computer [2].
Installing the system board
1 Align the system board to the port connectors on the back of the chassis and place the system board in the chassis.
2 Tighten the screws securing the system board to the chassis.
3 Connect the cables to the system board.
4 Install the:
a heat sink
b expansion card(s)
c hard drive
d memory module
e front bezel
f cover
5 Follow the procedure in After Working Inside Your Computer.
22
Removing and installing components
To Next Page
Loading...
