Navigation keys
The following table displays the system setup navigation keys.
NOTE: For most of the System Setup options, changes that you make are recorded but do not take eect until you restart the
system.
Table 2. Navigation keys
Keys Navigation
Up arrow Moves to the previous eld.
Down arrow Moves to the next eld.
Enter Allows you to select a value in the selected eld (if applicable) or follow the link in the eld.
Spacebar Expands or collapses a drop‐down list, if applicable.
Tab Moves to the next focus area.
NOTE: For the standard graphics browser only.
Esc Moves to the previous page till you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.
F1 Displays the System Setup help le.
System Setup options
NOTE
: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 3. General
Option Description
System Information This section lists the primary hardware features of your computer.
• System Information
• Memory Conguration
• PCI Information
• Processor Information
• Device Information
Boot Sequence Allows you to change the order in which the computer attempts to nd an operating system.
• Diskette Drive
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
• Internal HDD
Boot List Options Allows you to change the boot list option.
• Legacy
• UEFI
Advanced Boot Options Allows you to Enable Legacy Option ROMs
• Enable Legacy Option ROMs (Default: not enabled)
26 System Setup