Dell D13M - After Working Inside Your Computer

Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
• Small at blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the cover
1 Follow the procedure in Before Working Inside Your Computer.
2 Pull the release latch to release the cover [1].
3 Slide the cover and lift the cover to remove it from the computer [2].
Installing the cover
1 Align the cover along its tabs on the chassis of the computer.
2 Press down on the cover until it clicks into place.
3 Follow the procedure in After Working Inside Your Computer.
Removing the front bezel
1 Follow the procedure in Before Working Inside Your Computer.
2 Remove the cover.
3 To remove the front bezel:
2
Removing and installing components 7