Dell D13M - Removing the Front Bezel; Installing the Front Bezel; Removing the Hard Drive Assembly

6 Repeat steps 3 and 4to remove the additional hard drive (if available).
Installing the hard drive assembly
1 Insert the hard drive into the hard drive bracket.
2 Press the securing brackets and slide the hard drive assembly into the hard drive bay.
3 Connect the data cable and the power cable to the hard drive.
4 Install the cover.
5 Follow the procedure in After Working Inside Your Computer.
Removing the optical drive
1 Follow the procedure in Before Working Inside Your Computer.
2 Remove:
a cover
b front bezel
3 Disconnect the data cable and the power cable from the optical drive.
4 To remove the optical drive:
a Slide and hold the optical drive latch to unlock the optical drive [1].
b Slide the optical drive from the computer [2].
Removing and installing components
9