Option Description
• Disabled (Default)
• Reboot bypass
Password Change Allows you to enable the disable permission to the System passwords when the administrator
password is set.
Default Setting: Allow Non-Admin Password Changes is selected
TPM 1.2 Security Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating
system. The options are:
• TPM On (Default)
• PPI Bypass for Enable Commands
• PPI Bypass for Disable Commands
• Disabled
• Enabled
Computrace (R) Allows you to activate or disable the optional Computrace software. The options are:
• Deactivate (Default)
• Disable
• Activate
Chassis Intrusion Allows you to enable or disable the chassis intrusion feature. The options are:
• Disabled (Default)
• Enabled
• On-Silent
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
• Enable CPU XD Support (Default)
OROM Keyboard Access Allows you to determine whether users are able to enter Option ROM Conguration screens via
hotkeys during boot. The options are:
• Enable (Default)
• One Time Enable
• Disable
Admin Setup Lockout Allows you to prevent users from entering Setup when an administrator password is set.
• Enable Admin Setup Lockout
Default Setting: The option is disabled.
Table 7. Secure Boot
Option Description
Secure Boot Enable Allows you to enable or disable the Secure Boot Feature. The options are:
• Disabled
• Enabled (Default)
Expert Key Management Allows you to enable or disable Custom Mode Key Management.
• Enable Custom Mode (This option is not enabled by default)
If Enabled, the options are:
System Setup 29