Dell D13M - Page 32

Table 11. POST behavior
Option Description
Numlock LED Allows you to specify if the NumLock function is enabled when the system boots. This option is
enabled by default.
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should be enabled when the system
boots. This option is enabled by default.
Keyboard Errors Species whether keyboard related errors are reported when it boots. This option is enabled by
default.
Table 12. Virtualization support
Option Description
Virtualization This option species whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - This option is enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by Intel Virtualization technology for direct I/O.
• Enable VT for Direct I/O - This option is enabled by default.
Trusted Execution Allows you to specify whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by Intel Trusted Execution Program.
• Trusted Execution - This option is disabled by default.
Table 13. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by
default.
SERR Messages Allows you to control the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
BIOS Downgrade Allows you to control the ashing of the system rmware to previous revisions. This option is
enabled by default.
Data Wipe Allows you to securely erase data from all internal storage devices. The option is disabled by default.
BIOS Recovery Allows you to recover from certain corrupted BIOS conditions using a recovery le. This option is
enabled by default.
Table 14. Cloud desktop
Option Description
Server Lookup Method Allows you to specify how the Cloud Desktop software will lookup server addresses. The options
are:
• Static IP
• DNS (default)
Server Name Allows you to specify the Server Name of the server.
32 System Setup