Figure 46. Installing an expansion card
Next steps
1 Install the expansion card riser assembly.
2 Install the sled into the enclosure.
3 Follow the procedure listed in After working inside your system.
Related link
Installing the expansion card riser assembly
Installing a sled
Removing the riser card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the sled from the enclosure.
4 Remove the expansion card riser assembly.
5 If installed, remove the expansion card.
100
Installing and removing system components
To Next Page
Loading...
