Dell EMC PowerEdge C6420 - Removing the Mezzanine Card Bridge Board; Installing the Mezzanine Card Bridge Board

Removing the mezzanine card bridge board
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the sled from the enclosure.
4 Remove the expansion card riser assembly.
5 Remove the mezzanine card.
Step
Pull the mezzanine card bridge board away from the mezzanine card slot on the system board.
Figure 55. Removing the mezzanine card bridge board
Next step
Install the mezzanine card bridge board.
Related link
Removing a sled
Removing the expansion card riser assembly
Removing a mezzanine card
Installing the mezzanine card bridge board
Installing the mezzanine card bridge board
Prerequisite
1 Follow the safety guidelines listed in Safety instructions.
Step
Insert the mezzanine card bridge board into the mezzanine slot on the system board.
110
Installing and removing system components