Table 36. Supported backplane options for PowerEdge R440 systems
System Supported hard drives options
PowerEdge R440
3.5 inch (x4) SAS, SATA backplane
2.5 inch (x10) SAS, SATA or NVMe backplane
Figure 67. 4 x 3.5 backplane
1 release tab 2 SAS_A connector on the backplane
3 backplane power cable
Figure 68. 8 x 2.5 backplane
1
release tab 2 SATA_A cable connector
3 backplane signal cable 4 backplane
5 SATA_B cable connector 6 backplane power cable
Figure 69. 10 x 2.5 backplane
1
release tab 2 bridge PCIe cable connector
3 internal PCIe cable connector 4 NVMe cable connector
5 NVMe cable connector 6 backplane power cable
7 NVMe cable connector
80 Installing and removing system components
To Next Page
Loading...
