Dell EMC VMAX 250F - Page 76

Table 21 Extension cords and connectors options – single-phase (continued)
Plug on each
EMC power
cord
a
EMC-supplied extension
cord/model number
b, c
EMC
Power
Cable
P/N
EMC-supplied
extension cord
receptacle (P1)
connecting to
EMC plug
EMC-supplied
extension cord
plug (P2)
connecting to
customer PDU
receptacle
Customer PDU
receptacle
CAUTION
The single phase line
voltage must be below
264VAC to use these cable
assemblies.
038-003-
796 (GRY
21FT)
ES-PW40UASTL
(VMAX 250F)
EF-PW40UASTL
(VMAX 450F, VMAX 850F)
ET-PW40UASTL (VMAX
950F)
038-003-
439 (BLK
15FT)
038-003-
899 (GRY
15FT)
038-003-
480 (BLK
21FT)
038-003-
795 (GRY
21FT)
NEMA L6-30R CLIPSAL 56PA332 CLIPSAL
56CSC332
E-PW40L730
CAUTION
The single phase line
voltage must be below
264VAC to use these cable
assemblies.
038-004-
301 (BLK
15FT)
038-004-
302 (GRY
15FT)
038-004-
303 (BLK
21FT)
038-004-
304 (GRY
21FT)
NEMA L6-30R NEMA L7-30P NEMA L7-30R
a.
VMAX 450F, VMAX 850F, VMAX 950F: Six (6) plugs per system bay
VMAX 250F: Up to four (4) power cords
b.
Two (2) cords per model, cord length of 15 feet / 4.57 meters.
c.
The EMC ordering system defaults to one of the extension cord models based on the country of installation. The default value
can be overridden in the EMC ordering system.
Customer-to-system wiring for bays (single-phase)
The following figures provide cable descriptions for customer-to-system wiring for
single-phase power transmission.
Power cabling, cords and connectors
76 Site Planning Guide VMAX 250F, VMAX 450F, VMAX 850F, VMAX 950F with HYPERMAX OS