PowerConnect M8024 10 Gb Ethernet Switch Module
Externally accessible connectors
Serial 4-pin, USB 2.0 type A connector. Must use provided USB
type A to DB9 adapter to connect to terminal.
Optional Modules Two optional bays. Each bay supports an Uplink module
with four 10 Gb optical SFP+ connectors, or three 10 Gb CX4
uplinks. A stacking module is not available.
PowerConnect M6220 Ethernet Switch Module
Externally accessible connectors
10/100/1000 Mbps Ethernet Four autonegotiating RJ-45 ports
Serial 4-pin, USB 2.0 type A connector. Must use provided USB
type A to DB9 adapter to connect to terminal.
Optional Modules Two option bays. Each bay supports a module with two 24
Gb stacking ports, two 10 Gb CX4 copper uplinks, or two 10
Gb optical XFPs.
Brocade FC8 Fibre Channel Switch Module
Externally accessible connectors Eight physical FC8 ports (four enabled by default,
upgradeable to eight) that support 2/4/8 Gbps fibre channel
connections
Serial Port RJ-45
Brocade FC4 Fibre Channel Switch Module
Externally accessible connectors
Fibre channel Eight physical FC4 ports (four enabled by default,
upgradeable to eight) that support 1/2/4 Gbps FC
connections
Serial Port RJ-45
Mellanox M4001F/M4001Q Infiniband Switch I/O Module
Externally accessible connectors
Infiniband ports Sixteen QSFP connectors
Mellanox Infiniband Switch Module
Externally accessible connectors
Infiniband ports Eight Infiniband uplink ports
99
To Next Page
Loading...
Need help?
General
