System Specifications | 53
B
System Specifications
This appendix contains the following major sections:
• Physical Design
• System Power Specifications on page 56
• Component Power Requirements on page 56
• Agency Compliance on page 56
Physical Design
NOTE: See
Figure B-1
and
Figure B-2 on page 55
for the data used for the physical dimensions.
Table B-1. Chassis Dimensions
Parameter Specifications
Height 15.7 inches (39.88 cm)
Width 17.5 inches (44.45 cm)
Depth 15.3 inches (38.86 cm)
Weight 38 lbs (17.24 kg) with factory installed components
86.63 lbs (39.29 kg) fully loaded
Mounting Integral rack mount strips for front mounting in a standard 19-inch rack.
Clearance required Front: 18 inches (46 cm)
Rear: 18 inches (46 cm)
To Next Page
Loading...
