56 | System Specifications
www.dell.com | support.dell.com
System Power Specifications
Component Power Requirements
NOTE: The listed requirement for the PoE version of line cards excludes the required power for PoE, as that
requirement is a function of the number and type of PoE devices connected.
Agency Compliance
The C150 system is designed to comply with the following requirements.
Table B-2. AC System Power Specifications
Parameter Specifications
Nominal Input Voltage 100 - 240 V 50/60 Hz
Maximum System Power Input 4.5 KVA @ 100/120 V
4.4 KVA @ 200/240 V
Maximum Power Consumption 4,420 W @ 100/120 V
4,319 W @ 200/240 V
Maximum Thermal Output (856 W) at 100/120 V 2,921 BTU/hour
Maximum Thermal Output (835 W) at 200/220 V 2,850 BTU/hour
Table B-3. DC System Power Specifications
Parameter Specifications
Nominal Input Voltage -44 to -55 V
Maximum Current Draw (per DC PEM) 32 A per DC PEM
Maximum System Power Consumption 800 W
Maximum Thermal Output (720 W) 2,457 BTU/hour
Table B-4. Component Power Requirements
Component Catalog Number Maximum Watts
48-port 1G Line Card LC-CB-GE-48T 150W
4-port 10G XFP Line Card LC-CB-10GE-4P 150W
8-port 10G XFP Line Card LC-CB-10GE-8P 200W
48-port 1G SFP Line Card LC-CB-1GE-48P 130W
48-port 1G PoE Line Card LC-CB-GE-48V 150W
46-port FlexMedia Line Card LC-CB-10G-1G-36T 120W
46-port FlexMedia PoE Line Card LC-CB-10G-1G-36V 120W
C150 RPM LC-CB-RPM 165W
Fan Tray CC-C150-FAN 90W
AC Power Supply Unit CC-C-1200W-AC 1200W
DC Power Entry Module CC-C-PWR-DC 1400 W
To Next Page
Loading...
