8 | About This Guide
www.dell.com | support.dell.com
Visible and invisible laser radiation may be emitted from the aperture of the optical transceiver ports when no cable is
connected. Avoid exposure to laser radiation and do not stare into open apertures.
CAUTION: Wear grounding wrist straps when handling this equipment to avoid ESD damage.
WARNING: Leakage Current (High Touch Current) in AC-powered systems: AC power cords are secured to
the power inlet using the provided brackets. The power cord plugs must be secured to the building outlets by
the qualified chassis installer or a qualified electrician.
See
Chapter 3, Site Preparation
for more cautions.
Related Publications
For more information about the E1200 system, refer to the following documents:
• FTOS Configuration Guide for the E-Series
• FTOS Command Reference for the E-Series
• E-Series Network Operations Guide
• Release Notes for the E-Series and FTOS
To Next Page
Loading...
