80 | System Specifications
www.dell.com | support.dell.com
E1200i AC System Power Requirements
E1200i DC Chassis Physical Design
E1200i DC System Power Requirements
Parameter Specifications
Nominal Input Voltage 200-240 VAC 50.60 Hz
Maximum Power Consumption 5,734 @ 200/240 VAC
Maximum Thermal Output (5,484 W) 18,710 BTU/hour
Maximum Input Current (per power supply) 15.0 A @ 200 VAC
12.5 A @ 240 VAC
Maximum System Power Input 5.8 KVA @ 200/240 VAC
Parameter Specifications
Height 36.75 inches (93.35 cm)
Width 17.40 inches (44.20 cm)
Depth (without cable management system) 21.25 inches (53.98 cm)
Chassis weight with factory-installed components
(backplane and air filter)
97 pounds (approx.) (44.00 kg)
Weight fully loaded (backplane, air filter, 2 fan trays, 10
SFMs, RPMs, and 14 line cards)
319 pounds (approx.) (144.70 kg)
Mounting Attached rack mount brackets are factory set for front
mounting in a standard 19-inch rack.
Mounting brackets are adjustable for center and rear
mounting.
Optional brackets are available for front or center
mounting in a 23-inch rack or cabinet.
Rack clearance required Front: 18 inches
Rear: 20 inches
Thermal Output
Maximum for fully loaded chassis 6850W (23,389 BTU/HR)
Minimum for chassis with one 48-port 1GE line card 1,450W (4,951 BTU/HR)
Parameter Specifications
Nominal Input Voltage -44 to 60 VDC
Maximum Power Consumption 5,210 W
Maximum Thermal Output (4,910 W) 16,924 BTU/hour
Maximum Input Current (per DC PEM) 150 A
To Next Page
Loading...
