Dell G5 15 - Removing the Base Cover; Procedure

Removing the base cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Loosen the captive screw that secures the base cover to the computer base.
2 Using your ngertips, gently pry the base cover to release the tabs from the slots on the computer base.
3 Lift the base cover o the computer base.
4 Disconnect the battery cable from the system board.
3
Removing the base cover 13